Preliminary Procedure

Remove the theft deterrent module. Refer to Theft Deterrent Module Replacement .

1

Ignition and Start Switch Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Steering Wheel Theft Deterrent Lock

Tip
The steering wheel theft deterrent lock is not present on vehicles with AN3.

3

Ignition and Start Switch Bolt

Tighten
1.5 N·m (13 lb in)

4

Ignition and Start Switch

Procedure

1. Disconnect any electrical connectors as needed.
2. Disconnect the key in ignition switch from the ignition lock cylinder case.