GM Service Manual Online
For 1990-2009 cars only

Buick and Pontiac with U50/U2F

Step

Action

Value(s)

Yes

No

1

Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

2

  1. Turn the ignition switch to the ON position.
  2. Connect a scan tool.
  3. Select the Body Control Module Low washer fluid input menu.

Does the low washer fluid input data match the warning message?

--

Go to Step 4

Go to Step 3

3

Replace the instrument panel (IP) cluster. Refer to one of the following procedures:

Is the replacement complete?

--

Go to Instrument Cluster System Check

--

4

Inspect CKT 99 (BLK/WHT) for a short to ground.

Is the wiring OK?

--

Go to Step 5

Go to Step 6

5

Inspect the washer fluid level switch for a short to ground.

Is the switch OK?

--

Go to Step 3

Go to Step 7

6

Repair the short to ground in CKT 99 (BLK/WHT).

Is the repair complete?

--

Go to Instrument Cluster System Check

--

7

Replace the washer fluid level switch. Refer to Windshield Washer Solvent Container Replacement in Wiper/Washer Systems.

Is the replacement complete?

--

Go to Instrument Cluster System Check

--