A complete list of messages and analysis is provided in
the diagnostic portion of Instrument Panel, Guages, and Console. An export
ID# will accompany status messages for non-US vehicles. Pressing any one
of the DIC buttons will reset or remove any active status messages from the
display. Personalization messages supersede status messages.
For cellular telephone messages (if equipped), the cellular telephone
status is displayed by the instrument cluster as listed below, where ### indicates
the cellular telephone received signal strength:
| • | CEL-PHONE ### INCOMING CALL |
| • | CEL-PHONE SYSTEM NO SERVICE |
| • | CEL-PHONE ### CALL TIMER XX:YY |
The instrument cluster may also display phone numbers stored in the
cellular telephone's memory with associated alpha-tags and digit dialing.
Cellular telephone displays, when active, cannot be reset or removed from
the display. Warning/Status messages may supersede cellular telephone displays
if they exist.
For personalization status messages, use the driver information center
in order to allow the driver to customize various vehicle features through
the personalization displays. Personalization messages display in a predetermined
order. Initial messages will provide instructions on how to use the system,
followed by the actual customize selection messages. A list of messages
follows. A complete list of messages and analysis is provided in the diagnostic
portion of this section. An export ID# will accompany the instructional
messages for non-US vehicles:
| • | WELCOME TO BUICK OPTION FEATURE DRIVER # |
| • | ARMREST BUTTON CHANGES DRIVER # |
| • | PRESS ENG/MET TO SELECT OPTION |
| • | PRESS RESET TO GO TO NEXT CHOICE |
| • | LOCK FEEDBACK LIGHTS LIGHTS+HORN |
| • | UNLOCK FEEDBACK OFF LIGHTS |
| • | PERIMETER LIGHTING OFF ON |
| • | RECALL POSITION MEMORY EXIT |
| • | OPTION FEATURE SELECTION DONE |
Pressing either the ODO/TRIP, FUEL INFO or GAGE buttons may remove personalization
messages from the display , when active. Driver identifier messages supersede
personalization displays if they exist.
For the driver identifier messages, the DIC may be used in order to
indicate the current driver # of the vehicle. This information is displayed
at each ignition cycle and is part of the vehicle personalization functions.
You may program actual customer names into the instrument cluster in order
to appear in the driver # display for added convenience. A complete list
of messages and analysis is provided in the diagnostic portion of this
section. An export ID# will accompany the driver identifier messages for
non-US vehicles. The DIC may display the following messages:
You cannot remove active driver identifier messages from the display.
Other messages cannot supersede driver identifier displays.
