GM Service Manual Online
For 1990-2009 cars only

Special Tools

    • J 1859-A Steering Wheel Puller
    • J 42578 Steering Wheel Puller Legs

Removal Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Turn OFF the ignition.
  3. Remove the Inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement.
  4. Scribe an alignment mark on the steering wheel hub. Align the mark with the slash mark on the steering shaft.

  5. Object Number: 294367  Size: SH
  6. Loosen the steering wheel nut.
  7. Position the steering wheel nut flush with the end of the steering shaft.

  8. Object Number: 255213  Size: SH
  9. Assemble J 1859-A with J 42578 on the steering wheel.
  10. Use J 1859-A with J 42578 in order to unseat the steering wheel from the steering shaft.
  11. Remove J 1859-A and J 42578 from the steering wheel.
  12. Remove the steering shaft nut.
  13. Remove the steering wheel from the steering shaft.
  14. Remove the SIR connector from the steering wheel.

Installation Procedure


    Object Number: 294367  Size: SH
  1. Route the SIR connector through the steering wheel.
  2. Align the scribe mark on the steering wheel with the slash mark on the steering shaft.
  3. Install the steering wheel.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the steering shaft nut.
  6. Tighten
    Tighten the nut to 41 N·m (30 lb ft).

  7. Install the Inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement.
  8. Enable the SIR system. Refer to SIR Disabling and Enabling.
  9. Inspect the operation of the following components:
  10. • The horn
    • The steering wheel
    • The steering wheel controls