Special Tools

J 37096 Flywheel Holder

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the torque converter cover bolts.
3. Remove the torque converter covers.



4. Install the J 37096 in order to gain access to the torque converter bolts and to prevent the flywheel from turning.



5. Remove the flywheel to torque converter bolts.

1. Install the J 37096 in order to gain access to the torque converter bolts and to prevent the flywheel from turning.

Caution: Refer to Fastener Caution in the Preface section.




2. Install the flywheel to torque converter bolts.

Tighten
Tighten the bolts to 63 N·m (46 lb ft).




3. Install the torque converter covers.
4. Install the torque converter cover bolts.

Tighten
Tighten the bolts to 10 N·m (89 lb in)

5. Lower the vehicle.