GM Service Manual Online
For 1990-2009 cars only

Fuel Tank Pressure Sensor Replacement NU6

Removal Procedure


    Object Number: 1755107  Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the fuel tank wiring harness electrical connector (2) from the fuel tank pressure sensor.
  3. Remove the fuel tank pressure sensor (1).

Installation Procedure


    Object Number: 1755107  Size: SH
  1. Install the fuel tank pressure sensor (1).
  2. Connect the fuel tank wiring harness electrical connector (2) to the fuel tank pressure sensor.
  3. Lower the vehicle.

Fuel Tank Pressure Sensor Replacement NT7

Removal Procedure


    Object Number: 1671970  Size: SH
  1. Remove the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement.
  2. Remove the fuel sender access hole cover bolts.
  3. Remove the fuel sender access hole cover.

  4. Object Number: 1671971  Size: SH
  5. Disconnect the fuel level sensor wiring harness electrical connector (1) fuel tank pressure sensor.
  6. Remove the fuel tank pressure sensor.

Installation Procedure


    Object Number: 1671971  Size: SH
  1. Install the fuel tank pressure sensor.
  2. Connect the fuel level sensor wiring harness electrical connector (1) to the fuel tank pressure sensor.

  3. Object Number: 1671970  Size: SH
  4. Place the fuel sender access hole cover into position.
  5. Caution: Refer to Fastener Caution in the Preface section.

  6. Install the fuel sender access hole cover bolts.
  7. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  8. Install the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement.