GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

1

Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Steering Wheel and Column Description and Operation

2

Verify that the steering column is loose.

Is the steering column loose?

Go to Step 3

System OK

3

Inspect the steering column mounting brackets for looseness.

Are the steering column mounting brackets loose?

Go to Step 7

Go to Step 4

4

Verify that the steering column bracket capsule is not sheared.

Is the steering column bracket capsule sheared?

Go to Step 8

Go to Step 5

5

Inspect the intermediate shaft for worn joints or looseness.

Is the intermediate joint worn or loose?

Go to Step 9

Go to Step 6

6

Inspect the tilt head, support, and pivot pins for looseness.

Are there any loose components?

Go to Step 10

Go to Step 2

7

Notice: Refer to Fastener Notice in the Preface section.

Tighten the brackets to specifications. Refer to Fastener Tightening Specifications .

Did you complete the repair?

Go to Step 11

--

8

Replace the jacket assembly. Refer to Steering Shaft, Lower Bearing, and Jacket Replacement .

Did you complete the replacement?

Go to Step 11

--

9

Tighten or replace the intermediate shaft as needed. Refer to Intermediate Steering Shaft Replacement .

Did you complete the repair?

Go to Step 11

--

10

Repair or replace the tilt head, support, and pivot pins as necessary. Refer to Steering Shaft, Lower Bearing, and Jacket Replacement .

Did you complete the replacement?

Go to Step 11

--

11

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3