Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and Operation? | Go to Step 2 | |
2 | Verify that the lock system sticks in the START position. Does the lock system operate normally? | System OK | Go to Step 3 |
3 | Inspect the ignition lock cylinder case assembly for damage. Is the ignition lock cylinder case assembly damaged? | Go to Step 6 | Go to Step 4 |
4 | Inspect the lock cylinder for damage. Is the lock cylinder damaged? | Go to Step 7 | Go to Step 5 |
5 | Inspect the ignition switch for damage. Is the ignition switch damaged? | Go to Step 8 | Go to Step 3 |
6 | Tighten the ignition lock cylinder case assembly mounting bolts. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 9 | -- |
7 | Replace the lock cylinder. Refer to Ignition Lock Cylinder Replacement . Did you complete the repair? | Go to Step 9 | -- |
8 | Replace the ignition switch. Refer to Ignition and Start Switch Replacement . Did you complete the repair? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
