GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1572895  Size: SH
  1. Remove the mirror face (1). Refer to Outside Rearview Mirror Glass Replacement .
  2. Remove the screw from the mirror motor (2).
  3. Disconnect the electrical connector from the edge of the mirror motor.
  4. Note the position of the plugs on the mirror motor when removing.

  5. Remove the motor .

Installation Procedure

  1. Position the motor to the mirror housing.
  2. Connect the electrical connector to the edge of the mirror motor.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the screw to the mirror motor.
  5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  6. Install the mirror face to the mirror housing. Refer to Outside Rearview Mirror Glass Replacement .
  7. Inspect the mirror for proper operation.