Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake First Design

Important: To identify the camshaft drive design, refer to Camshaft Timing Drive Design Identification.

1. Remove the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .
2. Remove the intake camshaft position actuator bolt.
3. Remove the left intake camshaft position actuator.

1. Ensure the proper camshaft position actuator is installed. Observe the body of the camshaft position actuator for the IN marking (3).

The marking is for the intake camshaft position actuator.

2. Ensure the proper timing mark is used. Observe the outer ring of the camshaft position actuator for the L and circle marking (1).

The marking is for the alignment to the highlighted timing chain link on the left side of the engine.




3. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.

Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in the Preface section.

Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.

4. Tighten the camshaft position actuator bolt. Refer to Camshaft Position Actuator Installation - Left Side Intake .
5. Install the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .

Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake Second Design

Important: To identify a camshaft drive design, refer to Camshaft Timing Drive Design Identification.

1. Remove the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .
2. Remove the intake camshaft position actuator bolt.
3. Remove the left intake camshaft position actuator.

1. Ensure the proper camshaft position actuator is installed. Observe the body of the camshaft position actuator for the IN marking (3).

The marking is for the intake camshaft position actuator.

2. Ensure the proper timing mark is used. Observe the outer ring of the camshaft position actuator for the L and circle marking (1).

The marking is for alignment to the highlighted timing chain link on the left side of the engine.




3. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.

Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in the Preface section.

Important: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.

4. Tighten the camshaft position actuator bolt. Refer to Camshaft Position Actuator Installation - Left Side Intake .
5. Install the left exhaust camshaft actuator. Refer to Camshaft Position Actuator Replacement - Bank 2 (Left Side) Exhaust .