For 1990-2009 cars only
- Install the primary camshaft drive chain.
- Wrap the primary camshaft drive chain around the large sprockets of each camshaft intermediate drive chain idler and the crankshaft sprocket.
- The left camshaft intermediate drive chain idler timing mark (1) will align with a timing camshaft drive chain link (2).
- The right camshaft intermediate drive chain idler timing mark (2) will align with a timing camshaft drive chain link (1).
- The crankshaft sprocket timing mark (2) will align with a timing camshaft drive chain link (1).
- Ensure all the timing marks (2, 3, 6) are properly aligned with the timing camshaft drive chain links (1, 4, 5).
Important: Ensure that the crankshaft is in the stage one timing drive assembly position.
Important: Some models use a second design inverted tooth timing drive system. The second design drive system can be used in place of the first design roller timing system but all of the following components must be changed to the
second design:
• Primary timing drive chain • Crankshaft sprocket
Refer to
Camshaft Timing Drive Design Identification
• Intermediate drive shaft idler left and right
