Removal Procedure
- Remove the crankshaft balancer. Refer to
Crankshaft Balancer Replacement
.
- Pry out the crankshaft front oil seal using a suitable tool. Use care not to damage the engine front cover or the crankshaft.
- Inspect the crankshaft, the crankshaft balancer and the engine front cover for wear and/or damage. Replace the components as necessary. Refer to the following procedures:
Installation Procedure
Tools Required
J 35468 Crankshaft Front Oil Seal Installer
- Align the J 35468
and the crankshaft front oil seal with the engine front cover and crankshaft.
- Install the crankshaft front oil seal using the J 35468
and a suitable tool.
- Install the crankshaft balancer. Refer to
Crankshaft Balancer Replacement
.