For 1990-2009 cars only
- Remove the oil level sensor bolt.
- Remove the oil level sensor.
- Clean the oil pan in solvent. Remove all sludge and debris from the bottom.
- Inspect the oil pan sealing surfaces for damage.
- Replace the oil pan if necessary.
- Install the oil level sensor.
- Install the oil level sensor bolt.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the oil level sensor bolt to 10 N·m (89 lb in).
