GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 Enclave - AWD 🢒 Preface 🢒 Cautions and Notices 🢒 Oil Level Indicator Tube Replacement

Removal Procedure

    Object Number: 1829621 Size: SH
  1. Turn the ignition OFF.
  2. Remove the oil level indicator from the oil level indicator tube.
  3. Remove the oil level indicator tube bolt.
  4. Remove the oil level indicator tube up through the exhaust manifold.
  5. If you are replacing only the oil level indicator tube seal, remove and discard the old seal.

Installation Procedure

    Object Number: 1829621 Size: SH
  1. Install a new seal on the oil level indicator tube.
  2. Install the oil level indicator tube.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the oil level indicator tube bolt.

    4. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  4. Install the oil level indicator in the oil level indicator tube.