Preliminary Procedure

Remove the instrument cluster trim plate applique. Refer to Instrument Panel Cluster Trim Plate Applique Replacement .

1

Instrument Cluster Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Cluster Assembly

Procedure

1. Disconnect the electrical connections.
2. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
3. Refer to Control Module References for programming and setup information.

Preliminary Procedure

Remove the instrument cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Replacement .

1

Instrument Cluster Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Cluster Assembly

Procedures

1. Disconnect the electrical connections.
2. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
3. Refer to Control Module References for programming and setup information.

Preliminary Procedure

Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement .

1

Instrument Panel Cluster Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Panel Cluster Assembly

Procedure

1. Disconnect the electrical connector.
2. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
3. Refer to Control Module References for programming and setup information.