Caution: Refer to Brake Dust Caution in the Preface section.

Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.

1

Brake Pipe Fitting

Notice: Refer to Fastener Notice in the Preface section.

Procedure

1. Remove any dirt or debris from the brake pipe fitting.
2. Use a backup wrench on the brake hose fitting when disconnecting and connectng the brake pipe fitting.
3. Cap the brake pipe fitting to prevent brake fluid loss and contamination.

Tighten
17 N·m (13 lb ft)

2

Brake Hose Bracket Bolt

Tighten
9 N·m (80 lb in)

3

Brake Hose Fitting Bolt

Tighten
40 N·m (30 lb ft)

4

Brake Hose Fitting Gasket (Qty: 2)

Procedure

1. Discard the brake hose fitting gaskets.
2. Install 2 new brake hose fitting gaskets.

5

Brake Hose

Procedure

Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding.