Preliminary Procedures

1. Remove the front seat. Refer to Bucket Seat Replacement .
2. Remove the seat cushion cover. Refer to Front Seat Cushion Cover and Pad Replacement .

1

Inflatable Restraint Front Passenger Presence System Assembly

Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

Caution: To avoid personal injury, perform a preload test on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction.

Procedure

1. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .
2. Program the inflatable restraint passenger presence system after replacement. Refer to Control Module References .