High Mount Stop Lamp Replacement. Buick Enclave 2008

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 High Mount Stop Lamp Replacement

High Mount Stop Lamp Replacement Acadia

Callout	Component Name
Preliminary Procedures Open the liftgate. Remove the interior liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement. Remove the rear spoiler. Refer to Rear Spoiler Replacement.
1	High Mounted Stop Lamp Electrical Connector
2	High Mounted Stop Lamp Screws (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
3	High Mount Stop Lamp Assembly Procedure Remove the high mounted stop lamp from the bottom side of the rear spoiler.

Callout	Component Name
Preliminary Procedures Open the liftgate. Remove the interior liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement. Remove the rear spoiler. Refer to Rear Spoiler Replacement. Place the rear spoiler on a clean protected surface in order to remove the bottom mounted stop lamp.
1	High Mount Stop Lamp Screws (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
3	High Mount Stop Lamp Assembly Procedure Remove the high mount stop lamp from the bottom side of the rear spoiler.

Callout

Component Name

Open the liftgate.
Remove the interior liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement.
Remove the rear spoiler. Refer to Rear Spoiler Replacement.
Place the rear spoiler on a clean protected surface in order to remove the bottom mounted stop lamp.

High Mount Stop Lamp Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

High Mount Stop Lamp Assembly

Remove the high mount stop lamp from the bottom side of the rear spoiler.

Callout	Component Name
Preliminary Procedures Open the liftgate. Remove the interior liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement. Remove the rear spoiler in order to access the high mounted stop lamp. Refer to Rear Spoiler Replacement.
1	High Mounted Stop Lamp Electrical Connector
2	High Mounted Stop Lamp Bolts (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
3	High Mount Stop Lamp Assembly Procedure Remove the high mounted stop lamp from the bottom side of the rear spoiler.