GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Outside Rearview Mirror Glass Replacement

Removal Procedure

    Object Number: 1857104 Size: SH

    Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

    Notice: When servicing electrochromic glass that is broken, or if glass breaks during servicing, be cautious not to spill electrochromic fluid onto vehicle. Doing so will cause damage to the vehicle.

  1. The top inboard corner is the ideal location for pulling the mirror out of the housing.

    2. Object Number: 1856429 Size: SH
  2. Remove the mirror face as follows:
    3. 2.1. Push mirror glass bottom outboard (1) corner, furthest away from the vehicle door, as far as possible into the mirror housing.
    2.2. Place fingers tips behind the top inboard edge (2) corner, closest to the vehicle door.
    2.3. Pull the mirror glass with light pressure until the glass comes loose.
    2.4. Holding the mirror face, disconnect the electrical connectors from the back of the mirror.

Installation Procedure

    Object Number: 1856425 Size: SH
  1. Position the mirror face on a angle to the mirror housing.

    2. Object Number: 1857108 Size: SH
  2. Install the mirror face as follows:
    3. 2.1. Holding the mirror face, connect the electrical connectors to the back of the mirror.
    2.2. Position the mirror face to the motor retainer tabs.
    2.3. Position the hand in the center of the mirror face.
    2.4. Apply light pressure to the face.
    2.5. Push downward and inward to lock in place.
    2.6. Inspect the mirror face for proper operation.