Ignition and Start Switch Replacement. Buick Enclave 2008

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Ignition and Start Switch Replacement

Callout	Component Name
Preliminary Procedure Remove the ignition/start switch housing. Refer to Ignition and Start Switch Housing Replacement.
1	Ignition/Start Switch Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 2 N·m (18 lb in)
2	Ignition/Start Switch

Callout

Component Name

Remove the ignition/start switch housing. Refer to Ignition and Start Switch Housing Replacement.

Ignition/Start Switch Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

Ignition/Start Switch