Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Was the Audible Warning System Check performed? | -- | Go to Step 2 | |||||
2 |
Does the Tech 2 scan tool indicate the seat belt input is inactive with the driver's seat belt unfastened? | -- | Go to Step 3 | Go to Step 4 | ||||
3 |
Did the fasten seat belt chime sound for 4-8 seconds and the indicator lamp turns on for 63-77 seconds? | -- | Go to Step 7 | Go to Step 8 | ||||
4 |
Does the test light illuminate? | -- | Go to Step 8 | Go to Step 5 | ||||
5 |
Does the test light illuminate? | -- | Go to Step 6 | Go to Step 9 | ||||
6 | Use a DMM and measure the resistance between the driver's seat belt switch connector terminals A and B. Is the resistance measured within the specified range? | 2 ohms | Go to Step 10 | Go to Step 11 | ||||
7 | A malfunction is not present at this time. Refer to Audible Warnings Circuit Description for more information. Is the action complete? | -- | Go to Step 12 | -- | ||||
8 |
Has the repair been made? | -- | Go to Step 12 | -- | ||||
9 | Repair a poor connection or an open in circuit 750. Has the repair been made? | -- | Go to Step 12 | -- | ||||
10 | Repair a poor connection or an open circuit 238. Has the repair been made? | -- | Go to Step 12 | -- | ||||
11 | Replace the seat belt switch. Refer to Seat Belt Buckle Replacement - Left Front in Seat Belts. Has the repair been made? | -- | Go to Step 12 | -- | ||||
12 |
Have all the repair s been made? | -- | -- |
