Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
The BCM does not sound the key in the ignition reminder when the driver's door is open, the key is fully inserted in the ignition switch cylinder, and the ignition switch is in the OFF or the UNLOCK position. | ||||
1 | Was the Audible Warning System Check performed? | -- | Go to Step 2 | |
2 | Has the BCM Diagnostic System Check been performed? | -- | Go to Step 3 | |
3 |
Do the courtesy lights turn ON with the driver's door open? | -- | Go to Step 4 | Go to Step 8 |
4 |
Do the courtesy lights turn ON when removing the key from the ignition switch? | -- | Go to Step 5 | Go to Step 7 |
5 |
Does the Tech 2 scan tool indicate the key in input active using the ignition switch? | -- | Go to Step 6 | Go to Step 9 |
6 |
Does the BCM sound the key in the ignition reminder? | -- | Go to Step 11 | Go to Step 9 |
7 |
Does the test light illuminate? | -- | Go to Step 5 | Go to Step 10 |
8 | Repair a poor connection or an open in circuit 80 or 1550. Has the repair been made? | -- | Go to Step 11 | -- |
9 | Replace the ignition key alarm switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column-Tilt. Has the repair been made? | -- | Go to Step 12 | -- |
10 | Replace the ignition key alarm switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle in Steering Wheel and Column-Tilt. Has the repair been made? | -- | Go to Step 12 | -- |
11 | Malfunction not present at this time. Refer to Audible Warnings Circuit Description for additional information regarding the operation of the key in ignition reminder. Has the repair been made? | -- | Go to Step 12 | -- |
12 |
Have all the repairs been made? | -- | -- | |
