GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Century 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Compartment Replacement

Removal Procedure

    Object Number: 482563 Size: SH
  1. Remove the right instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  2. Open the I/P compartment.
  3. Release the loop of the damper cord (1) from the I/P support.
  4. Remove the screws from the I/P compartment hinge.

    5. Object Number: 326100 Size: SH
  5. Press inward on both sides of the I/P compartment housing and rotate down and out of the I/P.

Installation Procedure

    Object Number: 326100 Size: SH
  1. Align the compartment housing to the I/P.
  2. Press inward on both sides of the I/P compartment housing and rotate upward and into the I/P.
  3. Hand tighten the screws to the I/P compartment hinge.
  4. Align the I/P compartment housing to the I/P for the proper fit.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the screws to the I/P compartment hinge.

    6. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 482563 Size: SH
  6. Open the I/P compartment.
  7. Connect the loop of the damper cord (1) to the I/P support.
  8. Close the I/P compartment.
  9. Install the right I/P insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side .