GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Century 🢒 Body and Accessories 🢒 Interior Trim 🢒 Roof Rail Rear Assist Handle Replacement

Removal Procedure

    Object Number: 549212 Size: SH

    Important: The assist handle retaining screws are located under the handle. Do not remove the roof rail lamp cover and remove its two screws. The retainers (1) for these screws will fall behind the headliner.

  1. Pull the assist handle down to expose its screws.

    2. Object Number: 384915 Size: MH
  2. Remove the two screws (2).
  3. Disconnect the roof rail lamp electric connector.
  4. Remove the assist handle from the vehicle.

Installation Procedure
  1. Position the rear assist handle to the headliner.

    2. Object Number: 384915 Size: MH
  2. Connect the roof rail lamp connector.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the assist handle screws (2).

    4. Tighten
    Tighten the screws to 3 N·m (27 lb in).