FRONT/REAR BUMPER FASCIA WARPED OR RIPPLED (NEW P/N)

FRONT/REAR BUMPER FASCIA WARPED-OR RIPPLED

VEHICLES AFFECTED: 1984-87 BUICK "A" CAR ------------------ Customer comments have been received that the front or rear bumper fascia top horizontal surfaces are warped on the subject vehicles.

Service correction can be accomplished by installing a revised fascia from service. The revised fascias have enlarged attaching holes to eliminate stress and are made of stiffer material. The front fascia P/N is 25509104 and the rear, P/N is 25515030.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.