GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Allure 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1208422 Size: SH
  2. Remove the left and right side stabilizer shaft insulator clamp bolts.
  3. Remove the left and right side stabilizer shaft insulator clamp.

    4. Object Number: 1208424 Size: SH
  4. Remove the left and right side stabilizer shaft insulators from the stabilizer shaft.

Installation Procedure

    Object Number: 1208424 Size: SH
  1. Install the left and right side stabilizer shaft insulators to the stabilizer shaft.

    2. Object Number: 1208422 Size: SH
  2. Install the left and right side stabilizer shaft insulator clamps.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the left and right side stabilizer shaft insulator clamp bolts.

    4. Tighten
    Tighten the bolts to 42 N·m (31 lb ft).

  4. Lower the vehicle.