The tire pressure monitor (TPM) system warns the driver when a significant loss, or gain of tire pressure occurs in any of the 4 tires and allows the driver to display the individual tire pressures and their locations on the driver information center (DIC).

The system uses the instrument panel cluster (IPC), DIC, remote control door lock receiver (RCDLR), keyless entry transmitter(s), rear window antenna grid, a radio frequency transmitting pressure sensor in each wheel/tire assembly, and the serial data circuit to perform the system functions.

When the vehicle is stationary, the sensors internal accelerometer is inactive, which puts the sensors into a stationary state. In this state the sensors sample tire pressure once every 30 seconds and do not transmit at all if the tire pressure does not change. As vehicle speed increases, centrifugal force activates the sensors internal accelerometer causing the sensors to go into rolling mode. In this mode the sensors sample tire pressure once every 30 second and transmit in rolling mode once every 60 seconds. The RCDLR receives and translates the data contained in each sensors radio frequency transmission into sensor presence, sensor mode, and tire pressure. The RCDLR sends the tire pressure and tire location data to the DIC via the serial data circuit. Press the (i) button on the DIC 7-8 times to display the tire pressure data:

The sensors continuously compare their last pressure sample to their current pressure sample and will transmit in re-measure mode if a 1.2 psi change in tire pressure has been detected in either a stationary, or rolling state. When the TPM system detects a significant loss, or gain of tire pressure, the CHECK TIRE PRESSURE message is displayed on the DIC and the low tire pressure indicator is displayed on the IPC. Both the message and indicator can be cleared by adjusting the tire pressures to the recommended kPa/psi. The sensors pressure range is 0-116 psi. The sensors pressure accuracy from -10 to +70°C is +/- 13.7 kPa (2 psi).

The RCDLR has the ability to detect malfunctions within the TPM system. Any malfunction detected will cause the DIC to display the SERVICE TIRE MONITOR message. For more information on other functions of the RCDLR, refer to Keyless Entry System Description and Operation .