Schematic Reference: Fog Lights Schematics

Connector End View Reference: Master Electrical Component List

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Turn ON the ignition, with the engine OFF.
2. Observe the front fog lamp indicator.
3. Turn the front fog lamps ON and OFF.

Does the front fog lamp indicator operate properly?

Go to Testing for Intermittent Conditions and Poor Connections

Go to Step 3

Do the front fog lamps operate properly?

Go to Step 4

Go to Symptoms - Lighting Systems

Inspect for poor connections at the harness connector of the instrument panel cluster (IPC). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 6

Go to Step 5

Replace the IPC. Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2