GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Allure 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Antenna Cable Replacement

Removal Procedure

    Object Number: 1707032 Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement .
  3. Remove the left rear quarter lower panel. Refer to Quarter Lower Rear Trim Panel Replacement .
  4. Remove the left rear upper quarter trim panel. Refer to Quarter Upper Trim Panel Replacement .
  5. Lower the rear of the headliner. Refer to Headlining Trim Panel Replacement .
  6. Disconnect the antenna cable from the radio antenna module.

    7. Object Number: 1707033 Size: SH
  7. Remove the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  8. Remove the left lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement .
  9. Adjust the carpet for access to the antenna cable and body harness as required. Refer to Front Floor Panel Carpet Replacement .

    10. Object Number: 1707034 Size: SH
  10. Disconnect the antenna cable from the antenna extension cable.
  11. Cut off the visible ends of the antenna cable from the wiring harness in the following locations:
    12. • The lower pillar garnish molding
    • The rear header area

Installation Procedure

    Object Number: 1707033 Size: SH
  1. Install the antenna cable to the vehicle. Use electrical tape in order to secure the antenna cable to the top of the wiring harness. Secure the cable to the harness at least every 150 mm (6 in).

    2. Object Number: 1707034 Size: SH
  2. Connect the antenna cable to the antenna extension cable.
  3. Install the carpet. Refer to Front Floor Panel Carpet Replacement .
  4. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  5. Install the left lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement .

    6. Object Number: 1707032 Size: SH
  6. Connect the antenna cable to the radio antenna module
  7. Install the headliner. Refer to Headlining Trim Panel Replacement .
  8. Install the left rear upper quarter trim panel. Refer to Quarter Upper Trim Panel Replacement .
  9. Install the left rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .
  10. Install the rear seat back. Refer to Rear Seat Back Replacement .
  11. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .