Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Instrument Cluster Schematics or Release Systems Schematics Connector End View Reference: Displays and Gages Connector End Views | |||
1 | Did you review the Luggage Compartment Description and Operation, and perform the necessary inspections? | Go to Step 2 | |
2 | Open the rear compartment. Does the trunk ajar message/indicator illuminate? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 |
Does the trunk ajar message/indicator illuminate? | Go to Step 4 | Go to Step 5 |
4 | Connect a fused jumper between the rear compartment lid ajar switch signal circuit and the rear compartment lid ajar switch ground circuit. Does the trunk ajar message/indicator illuminate? | Go to Step 7 | Go to Step 6 |
5 | Test for an open or high resistance in the signal circuit of the rear compartment lid latch. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
6 | Test for an open or high resistance in the ground circuit of the rear compartment lid latch. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 10 | -- |
7 | Inspect for poor connections at the harness connector of the rear compartment lid latch. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
8 | Replace the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement . Did you find and correct the condition? | Go to Step 10 | -- |
9 | Replace the instrument panel cluster (IPC). Refer to Control Module References for the IPC replacement, setup, and programming. Did you find and correct the condition? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
