GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 39400-A Halogen Leak Detector

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement for the 3.8L engine or Air Cleaner Assembly Replacement for the 3.6L (LY7) engine.
  2. Disconnect the electrical connector from the A/C refrigerant pressure sensor.

  3. Object Number: 1642671  Size: SH
  4. Remove the refrigerant pressure sensor from the liquid line.

Installation Procedure

  1. Install the new O-ring seal. Refer to O-Ring Replacement .
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1642671  Size: SH
  3. Install the refrigerant pressure sensor to the liquid line.
  4. Tighten
    Tighten the sensor to 4.7 N·m (41 lb in).

  5. Connect the electrical connector to the A/C refrigerant pressure sensor.
  6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement for the 3.8L engine or Air Cleaner Assembly Replacement for the 3.6L (LY7) engine.
  7. Leak test the fittings of the component using J 39400-A .