GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Allure 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

    Object Number: 1357197 Size: SH
  1. Remove the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  2. Disengage the outboard receiver retainers from the rear shelf.
  3. Lift the receiver from the rear window shelf trim panel and disconnect the electrical connector.
  4. Remove the receiver.

Installation Procedure

    Object Number: 1357197 Size: SH
  1. Connect the electrical connector to the receiver.
  2. Install the receiver by positioning the inboard retainer to the slot in the rear window shelf trim panel. Press the outboard retainers into the rear window shelf trim panel openings.
  3. Install the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  4. If a new remote control door lock receiver is being installed, program the transmitters. Refer to Control Module References for programming and setup information.